Xerox 480cx - Manual (Page 23)

Set Up Your Machine 1-11
1
Installing Ink Cartridges
Your machine is a dual cartridge Inkjet printer. You must use a black and a
color ink cartridge. When viewed from the front of the machine, the Black
Ink Cartridge installs in the right Cartridge Holder while the Color Ink
Cartridge installs in the left Cartridge Holder. An optional Photo Ink
Cartridge, which can be installed in place of the Black Ink Cartridge, is also
available.
When installing ink cartridges, you must provide specific information to the
Workcentre 480cx about the cartridges you install. This allows the printer
to keep track of which cartridges are installed and to gauge ink cartridge
utilization. There are two methods of entering this information. You may
enter the required information directly via the WorkCentre 480cx control
panel or you can update Ink Cartridge information using the WorkCentre
480cx Control Software and a PC.
The procedures in this section cover Ink Cartridge Installation without using
the WorkCentre 480cx Control Program. To install Ink Cartridges using the
WorkCentre 480cx Control Program, refer to The Xerox WorkCentre
Control Program on page 5-21.
Print the 480cx User Guide