Xerox 480cx - Manual (Page 52)

1-40 Getting Started
5 Press the Left or Right button repeatedly until you locate the desired
mode:

STANDARD - use with most documents.

FINE - use for documents with fine detail, such as small print.

SUPER FINE–use for documents that have extremely fine detail.
6
Press the Start/Enter button to select the desired Default Resolution.
The display again prompts you to choose Resolution or Contrast .
7 Press the Up and Down buttons or 2 on the Number keypad to enter the
Default Contrast set up menu.
The current Default Resolution is displayed.
8 Press the Left or Right button repeatedly until you find the desired
mode:

NORMAL–use with documents of average or normal contrast.

DARKEN–use with documents with low contrast or light images.

LIGHTEN–use with documents with high contrast or dark images.
9
Press the Start/Enter button to select the desired mode. The Resolution
or Contrast setup menu selection is displayed.
10 Press the Stop button to return to Standby mode.
1.RESOLUTION
2.CONTRAST
DEF. CONTRAST
[ NORMAL ]
Print the 480cx User Guide