Xerox 480cx - Manual (Page 175)

The Xerox WorkCentre Control Program 5-27
5
Using the DOS Printing tab
Use the DOS Printing tab to change print settings for DOS applications that
run from the DOS prompt in Microsoft Windows.
Select the desired options in the Print Quality, Paper, and Font Settings.
Choose if desired: Print Fonts or Defaults.
Other settings:

Graphics - Click Graphics to set the addressability in dots per inch
(dpi). The default is 75 dpi.

CR - Click CR to select a carriage return mode. CR + LF instructs the
printer to perform a line feed (LF) after each carriage return (CR). The
default is CR Only.
Print the 480cx User Guide