Xerox 480cx - Manual (Page 293)

Telephone Connectivity Guidelines 9-23
9
The WorkCentre is set up at the factory to automatically answer an
incoming call. If you do not want the WorkCentre to answer the phone, set
the
Receive mode to TEL . At the control panel, press the Receive button
(until TEL displays).
Or, you may want to leave the Receive mode on Fax , but increase the
number of rings before the WorkCentre answers the call. At the control
panel, press the following keys:
MENU, SYSTEM DATA, UP ARROW 7 TIMES (until ANSWER ON
RINGS displays)
Next, enter the number of times the telephone will ring before the
WorkCentre answers the call (
1 - 7 ), and press the STOP button.
Connect an extension telephone to the EXT connector on the WorkCentre.
Print the 480cx User Guide