Xerox 480cx User Manual
Page 291
Telephone Connectivity Guidelines
9-21
9
You’re using your WorkCentre as a
stand-alone fax machine without a PC
This is the simplest of all configurations. Plug one end of a telephone cable
into the WorkCentre’s
Line
connector, and the other end into the wall
outlet.
The WorkCentre is set up at the factory to automatically answer an
incoming call. If you do not want the WorkCentre to answer the phone, set
the
Receive mode
to
TEL
. At the control panel, press the Receive button
(until TEL displays).
Or, you may want to leave the
Receive mode
on
Fax
, but increase the
number of rings before the WorkCentre answers the call. At the control
panel, press the following keys:
MENU, SYSTEM DATA, UP ARROW 7 TIMES (until ANSWER ON
RINGS displays)
Next, enter the number of times the telephone will ring before the
WorkCentre answers the call (
1 - 7
), and press the STOP button.
You can connect an extension telephone to
EXT
on the WorkCentre.
Wall Outlet
From the Line connector
Print the 480cx User Guide