Xerox 480cx - Manual (Page 212)

6-34 Scanning
b) Or, click on the Reset button to return the Tonal Map to the
default diagonal as in the original.
c) Click the Save button to save the changes as a customized setting.
A Save As dialog box will appear upon selection of this button.
Enter the name for the customized curve and click on the
OK
button.
3 Select the Histogram button to see a histogram of the changes made.
4 Select the OK button to accept all the changes or the Cancel button to
abandon all unsaved changes.
Tonal Map with Color Scanning
With color scanning selected, you may select a color channel via the color
buttons. This will allow you to adjust the Tonal Map for each color in the
Red ,Green , and Blue spectrum. The same procedure applies for color as is
described above for Gray 256 Scales.
Color Channel Buttons
Print the 480cx User Guide