Xerox 480cx - Manual (Page 83)

Manual Faxing 3-7
3
Sending a Fax After Talking
If you have a regular phone connected to the EXT jack on the back of the
machine, you can send a fax after speaking with a person at the remote site.
1 Adjust the document guides to match the width of the document.
2 Slide the document face down into the Automatic Document Feeder
until it is grasped and pulled into the machine.
3 Pick up the handset of the telephone connected to the EXT jack.
4 Call the remote location.
DIAL FAX NUMBER THEN PRESS START appears in the LCD
display.
Note: For a successful fax transmission, it is imperative that steps 5 to 7
occur in the proper order.
5 When finished talking, instruct the person at the remote location to
press the Start button on their fax machine. They can then hang up.
The remote fax machine will send the initial fax tones.
6 Wait until you hear the fax tone from the remote fax machine.
7 Press the Start/Enter button on the WorkCentre 480cx. The machine
begins to transmit.
8 Replace the handset.
Print the 480cx User Guide