Xerox 480cx - Manual (Page 143)

Polling 4-11
4
7 The display asks you to enter a 4-digit poll code.
8 If the remote machine is secured with a poll code, you must enter the
correct code, and press the Start/Enter button.
Or
If the remote machine is not secured with a poll code, press the
Start/Enter button to accept [0000] which represents no code.
9 The display prompts for the time range, during which the machine will
call and poll the remote machine(s).
Type the time range for polling. If you have configured your machine
to use a 12-hour format, remember to specify A.M. or P.M.
10 Press the Start/Enter button.
Note: If you set a time earlier than the current time, your machine calls the
number at that time on the following day.
POLL CODE
[0000]
START -> END
HH:MM -> HH:MM
Print the 480cx User Guide