Xerox 480cx - Manual (Page 89)

Manual Faxing 3-13
3
5 If you have entered the last fax number setting, press the Stop button.
Or
If you want to send the document to more than one location, press the
Start/Enter button and enter another fax number using the numeric
keypad, One-Touch keypad, or two digit Speed Dial number.
The number appears in the display.
Repeat Step 5 until you have entered the last fax number. Press the
Stop button after entering the last fax number.
Note: Only a single Group dial number may be used in a Delayed
Transmission Operation.
6 The display prompts you to enter an ID for the transmission. If you
want to assign a name to the transmission, enter it using the Number
keypad. If not, proceed to Step 7.
For details on how to enter letters using the Number keypad, see
Entering Alphanumeric Characters on page 3-26.
7 Press the Start/Enter button. The display shows the current time on the
upper line and prompts you to enter the time the fax will be sent.
CURRENT 12:30PM
START 12:30PM
Print the 480cx User Guide