Smart Technologies FSSBID 100 - Manual (Page 42)

3 2 | M O D E L F S S B I D 1 0 0 : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
99-00962-20 REV C0
IMPORTANT
Ensure that your SMART Board interactive display frame is functioning correctly
before you install the rear access panels on your SMART Mobile Stand
(see page 58). Connect your SMART Mobile Stand temporarily to a power outlet
while you check your interactive display frame.
Connecting Your SMART Board
for Flat-Panel Displays Interactive Overlay
This section describes how to connect your SMART Board for Flat-Panel Displays
interactive overlay to your SMART Mobile Stand (instead of directly to a computer).
Refer to the SMART Board for Flat-Panel Displays Installation Guide: Corner Brackets
( document 769 at www.smarttech.com/support ) for general instructions on installing
your interactive overlay on your flat-panel display.
IMPORTANT
You need adapter AD09 to install your SMART Board for Flat-Panel Displays
interactive overlay. Purchase this adapter (Part No. ADP USB AB) from your
authorized SMART reseller .
USB A Female to
USB B Female
Adapter AD09