Veris Technologies VIS_NIR Spectrophotometer - Operating Instructions - Manual (Page 44)

Pub# OM17-NIR Shank
4-5
Figure 7
Rachet jack -- 20 hour intervals
Figure 8
Electrode coulters Pivot --In all but the most extremely rocky conditions, the coulter
electrodes should not flex in the field, thus minimal movement will be realized at the
pivot. 80-hour intervals should be sufficient.
Figure 9
Hubs --Use good quality wheel bearing or lithium grease for lubrication, but we suggest
that you grease the hubs sparingly. Over-lubricating the hub will result in pre-mature
Pivot grease
zerks (2 per
hangar; 4 total )
grease zerks
grease zerk