Veris Technologies VIS_NIR Spectrophotometer - Operating Instructions - Manual (Page 56)

Pub# OM17-NIR Shank
5-3
Troubleshooting NIRS continued
Auxiliary data not updating or ports not setting up correctly
1. Shut down power, and restart cases
2. Ensure USB cables are secured tightly
3. Follow the steps outlined in procedure #10, to ensure data is present on the ports.
How many times do I need to run system check?
A system check transform should be run at least once for each field mapped.
Is the data treated before output to file?
The data is not pretreated before output. If a pretreatment is desired for calibration the
user can pretreat their data using their spectral processing software (ex. Unscrambler).
Ref check light turns red.
If the ref check light turns red, then another dark and reference needs to be stored.
This can be done by click on the Dark & Ref button. This may need to be done several
times to flush out the bad reference. Having the ref check light turn red will prevent the
user from logging.