Veris Technologies VIS_NIR Spectrophotometer - Operating Instructions - Manual (Page 79)

Pub# OM17-NIR Shank
5-26
The P_Sample, P_Long, P_Lat, P_Depth are the actual sample number, longitude,
latitude, and depth. The # Spec refers to the number of spectra found near each sample
location. These are the locations that were selected in the sampling program. The
depth is only used in the probe mode. The next 17 columns are the interpolated data
found near each of those actual locations. Then the next 384 columns are the
interpolated spectra data found near each of the actual locations.
Settings Folder
These files are used to store values and paths for the Operating software. These files
are automatically created and should not be altered.
boolean.txt
Stores steps of Operating
software.
configuration.txt
Stores aux data length and
spectrum length.
spectra path.txt
Stores spectra path.
xform path.txt
Stores xform path.