VEGA VEGAMET 515V - Manual (Page 28)

28 VEGAMET 515V
Input1
Input 2
Input 3 MET02
MET03
MET04
….
Inputs no. 1 and 2: VBUS input (measured value)
Inputs no. 4 and 5: Correction input
6.7 Configuration of inputs
Configuration
Confi-
gura-
tion
Config
inputs
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
Input local MET:
Here you can enquire another VEGAMET
(e.g. Met 04) and thereby specify that the
input signal will not be received from a di-
rectly connected sensor, but from a
VEGAMET connected via DISBUS. The en-
quired VEGAMET number corresponds to
the DISBUS address of the instrument (see
chapter 4.1).
If another VEGAMET has been chosen, the
menu item "Input undefined" appears in which
you can set the input number of the other
VEGAMET (see example "Weir control“).
The sensor characteristics values are pro-
vided by the connected sensor and cannot
be modified here.
The sensor menu is also provided by the
connected sensor. It allows the sensor to be
configured from VEGAMET.
Input
no. 1 Input
no. 2
Input
from
local
Met
Channel
no.
K1
Input
undef-
ined
Input
from
local
Met
Sensor
charac-
terist-
ics
Min.
meas.
range
0,00
Max.
meas.
range
1,00
Input
undef-
ined
Serial
no.
XXXX
XXXX
Input
no. 4 Input
no. 5
like input no. 4
like input no. 1
Edit
ser. no.
0000
0000
Sensor
optimise
Autom.
sensor
search
Sensor
search
OK ?
Sensor
search
Now !
OK ?
For radar/ultrasonic sensors: see
MINICOM menu schematic in
VEGASON/VEGAPULS operating
instruction manual under chapter
"Adjustment with VEGAMET or
MINICOM“.