VEGA VEGAMET 515V - Manual (Page 37)

VEGAMET 515V 37
7.5 Choose linearisation curve
VEGAMET's evaluation routines can be
adapted to different vessel forms. For this
purpose, you can choose between different
linearisation curves:
- linear (factory setting)
- cylindrical tank
- spherical tank
- Lin-curve 1
- Lin-curve 2
- Lin-curve 3
You can edit your modify lin. curves 1 … 3
yourself (see appropriate chapter).
After a linearisation, the requested output can
be assigned to the linearised value in the
menu range "Parameter adjustment outputs“
(menu items "prop. to…“ and "Unit…“).
Parameter adjustment
7.6 Integration time
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment Signal
condi-
tioning
Scal-
ing Lin.
curve
linear
Meas.
value
indication
If the integration time is set to 0 s (factory
setting), each quick change of the product
surface (e.g. waves) will be immediately
detected and interpreted as level change. All
output values of VEGAMET will follow the
wave movements. To avoid this, the integra-
tion time can be increased (a max. of
600 s is possible with VEGAMET). The higher
the time setting, the slower the measurement
reacts.
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment Sig-
nal
condi-
tioning
Scal-
ing
Meas.
value
indication
Integr
ation
time s
0
Lin.
curve
linear
Cylindrical tank
Spherical tank
Lin. curve1
Lin. curve2
Lin. curve3