VEGA VEGAMET 515V - Manual (Page 57)

VEGAMET 515V 57
E060 Span of the current output values too small. The values for the current output
are too close together or are identical. Please check the adjustment of the
current output.
E061 Span of the voltage output values too small. The values for the voltage output
are too close together or are identical. Please check the adjustment of the
voltage output.
E063 Wrong sensor characteristics values. Please check the sensor characteristics
values
E102 A reset of the configuration was carried out on this VEGAMET via the key-
board.
E110 Switching hysteresis too small. The switching points are too close together or
are identical.
E111 Relay switching points reversed. The relay switching points are reversed with
regard to the selected relay mode.
Error code Meaning
Diagnosis