VEGA PLICSCOM User Manual
Page 28
28
6 Setup - radar sensors from software 4.0.0
PLICSCOM •
36433-EN-130228
In the delivery status, the sensor is set to the ordered national lan-
guage.
The optionally integrated background lighting can be adjusted via the
adjustment menu. The function depends on the level of the supply
voltage, see operating instructions of the respective sensor.
The lighting is switched off in the delivery status.
In this menu item, the device status is displayed.
The respective min. and max. measured value of the electronics
temperature is saved in the sensor. These values as well as the actual
temperature value are displayed in the menu item "Peak values".
In this menu item you select the measured variable of the system and
the temperature unit.
Display/Backlight
Diagnostics/Device
status
Diagnosis/Electronics
temperature
Additional adjustments/
Device units