8 setup, 1 select the mode, 2 flow measurement – VEGA VEGADIF 65 Foundation Fieldbus User Manual
Page 57
Advertising
57
8 Setup
VEGADIF 65 • Foundation Fieldbus
36130-EN-130417
8 Setup
8.1 Select the mode
The following operating modes can be set on VEGADIF 65:
•
Flow measurement
•
Level measurement
•
Differential pressure measurement
8.2 Flow measurement
In flow measurement, VEGADIF 65 is normally used without a chemi-
cal seal.
Before adjusting VEGADIF 65, you have to clean the effective pres-
sure lines and the instrument must be filled with the medium.
+
–
I
II
+
6
7
3
2
4
A
B
Fig. 50: Preferred measurment setup for gases
I VEGADIF 65
II 3-fold valve block
2.4 Inlet valves
3 Breather valve
6.7 Vent valves on VEGADIF 65
A, B Blocking valves
Instructions
Measurement setup for
gases
Advertising