Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 170)

170
Appendix A Labels
Labels
Printer Weight And Dimensions
* With a power stacker, the weight increases by 21 lbs. and the depth
increases by 4.75 inches for a deeper rear door.
** With the ZTP option, the weight increases by 12 lbs. and the height
is increased by 7 inches.
Environmental Characteristics
On Backing: One-part continuous perforated fanfold back form. Labels must be placed at
least 1/6 inch (0.42 cm) from the fan-fold perforation. Backing adhesive must
not be squeezed out during printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide, including the two standard perforated
tractor feed strips. A maximum sheet length of 16 inches (40.64 cm) between
top and bottom perforations. Power Paper Stacker option is 5 to 12 inches
(12.7 to 30.48 cm) long.
NOTE: A 16 inch rear door is needed for the cabinet model. Power Paper
Stacker option is 5 to 12 inches (12.7 to 30.48 cm) long.
Thickness: Not to exceed 0.025 inch (0.064 cm) (including backing sheet)
Cabinet Type Dimensions Weight
Height Width Depth Unpacked Packaged
Floor Cabinet 42.5 inches 27 inches 29 inches* 225 lbs. 285 lbs.*
Pedestal 35 inches** 26 inches 21 inches 105 lbs.** 115 lbs.**
Temperature :
Operating: 50° to 104° F (10° to 40° C) up to 5000 feet (1524 meters)
50° to 90° F (10° to 32° C) up to 8000 feet (2438 meters)
Storage: -40° to 158° F (- 40° to 70° C)
Relative Humidity
Operating: 15% to 80% (noncondensing)
Storage: 15% to 90% (noncondensing)