Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 91)

WLAN LEAP
91
WLAN LEAP
Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
• Open (the default). Selects open authentication.
• Shared . Selects shared key authentication.
• Kerberos . Selects Kerberos authentication (for use when a Symbol RF
card is installed).
• LEAP . Selects LEAP authentication (for use with a Cisco RF card
installed).
LEAP Username
• LEAP Username (01-15) . The first 15 characters of the LEAP user name
(maximum number of characters is 32).
• LEAP Username (16-30) . Characters 16 to 30 of the LEAP user name
(maximum number of characters is 32).
• LEAP User (31-32) . Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).
Reset LEAP User
Resets the LEAP user name to an empty string.
LEAP Password
• LEAP Password (01-15) . The first 15 characters of the LEAP password
(maximum number of characters is 32).
• LEAP Password (16-30) . Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
• LEAP Password (31-32) . Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
Reset LEAP Password
Resets the LEAP password to an empty string.
WLAN
LEAP 2
(from page 77)
Auth Method
Open*
Shared
Kerberos 1
LEAP 2
* = Factory Default
1 = Only if a Symbol radio card is installed.
2 = Only if a Cisco radio card is installed.
LEAP
Username
Reset LEAP
User
Reset LEAP
Password
LEAP Username (01-15)
LEAP Username (16-30)
LEAP Username (31-32)
LEAP
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)