Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 58)

58
Chapter 4 ZTP SETTINGS
Save Config.
This option allows you to save up to eight configurations to meet different print
job requirements. This eliminates the need to change the parameter settings
for each new job. The configurations are stored in memory and will not be lost
if you turn off the printer. If the Protect Configs. parameter is enabled, the new
configuration will not be saved unless the existing configuration has been
deleted first. The factory default configuration cannot be changed. See
“Saving Your New Configuration” on page 46 for details.
Power-Up Config.
You can specify which of the nine configurations (Factory or 1-8) will be the
power-up configuration.
ZTP SETTINGS
See Appendix C, page 177.
CONFIG. CONTROL
The CONFIG. CONTROL menu allows you to control your printer’s
configurations according to the specifications necessary for your print jobs.
Load Config.
The printer can store numerous configurations in memory. This parameter
allows you to select and load a specific configuration.
CONFIG.
CONTROL
(from page 52)
Load
Config.
Save
Config.
Print
Config.
Delete
Config.
Power-Up
Config.
Protect
Configs.
Name
Configs
Reset Cfg
Names
Factory*
1-8
1*
2-8
Current Short*
Current Full
Factory
Power-Up
All
1-8
1*
2-8
Factory*
1-8
Disable*
Enable
1-8 1*
2-8
All
* = Factory Default
Auto
Save
Enable*
Disable