Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 97)

Hangul LP+ Emulation
97
Prop. Spacing
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space arround the character.
This parameter only works in ASCII mode. This is not applicable for Hangul
printer.
• Disable (default). Each character cell is printed with the same width.
• Enable . The width of each character cell varies with the width of the
character.
Bold Print
• Disable (default). Text is printed normally.
• Enable . Text is printed with a heavy line thickness.
Italic Print
• Disable (default). Text is printed normally.
• Forward Slant . Text is printed with a forward slant.
• Backward Slant . Text is printed with a backward slant.
Slashed Zero
This parameter allows you to print the number “0” with or without the slash.
• Disable (default). Zero is printed without a slash.
• Enable . Zero is printed with a slash.
DBCS/ASCII Mode
• DBCS Mode (default). The printer is in DBCS mode. It can print double-
byte characters as well as a limited number of single-byte characters.
• ASCII Mode . The printer is in ASCII mode. It can only print single-byte
characters.
DBCS ASCII Style
This parameter allows you to specify the appearance of the single-byte
alphanumeric characters in DBCS mode.
• Normal (default).
• Oversize . The alphanumeric characters will appear larger than normal
single-byte characters. For example, the appearance of character “8” will
be changed to “8”.
• OCRB . The alphanumeric characters will print in OCRB style. It only
takes effect on LQ typeface for Hanzi/Kanji printer.
• Normal Thin . The alphanumeric characters will be slightly thinner
compared with Normal style. This is only applicable for Hangul printer.