Printronix P7000 H-Series Cartridge Ribbon Printer - Manual (Page 43)

Changing Parameters Example
43
Changing Parameters Example
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration menu
above, and in all the configuration menus in this chapter, the factory default
values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the default
settings. This section provides an example procedure for changing individual
parameter values.
The following procedure shows how to change and save the settings for the
Unidirectional and Accented Char options. Use these guidelines to navigate
the configuration menus and change other parameters.
NOTE: When changing Ribbon End Point parameters, all changes will apply
to every configuration saved. Changes to Ribbon End Point cannot
be saved to an individual configuration.
. . .
OFFLINE
QUICK
SETUP
PRINTER
CONTROL
Ribbon End
Point
Open Platen
@ BOF
Unidirectional
Tear Bar
Dist.
Display
Language
Disable*
Enable
Disable*
Enable
7.46 in.*
(4.5-10.5 in.)
English*
* = Factory Default
1 Only for P7000 Pedestal Model
Accented
Char
Standard*
Tall
Darker +6
Darker +5
Darker +4
Darker +3
Darker +2
Darker +1
Normal
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
Lighter -7*
Lighter -8
Lighter -9
Lighter -10
View
Function 1 .
Disable*
Enable