Rainbow Electronics T89C5121 - Manual (Page 46)

46
A/T8xC5121
4164G–SCR–07/06
Table 27. SCWT2 Register
SCWT2 (S:B6h, SCRS = 0)
Smart Card Character/Block Wait Time Register 2
Reset Value = 0000 0000b
Table 28. SCWT1 Register
SCWT1 (S:B5h, SCRS = 0) Smart Card Character/Block Wait Time Register 1
Reset Value = 0010 0101b
Table 29. SCWT0 Register
SCWT0 (S:B4h, SCRS = 0)
Smart Card Character/Block Wait Time Register 0
Reset Value = 1000 0000b
7 6 5 4 3 2 1 0
WT23 WT22 WT21 WT20 WT19 WT18 WT17 WT16
Bit
Number
Bit
Mnemonic Description
7-0 WT[23:16]
Wait Time Byte 2
Used together with WT[15:0] (see SCWT0 Register).
7 6 5 4 3 2 1 0
WT15 WT14 WT13 WT12 WT11 WT10 WT9 WT8
Bit
Number
Bit
Mnemonic Description
7-0 WT[15:8]
Wait Time Byte 1
Used together with WT[23:16] and WT[7:0] (see SCWT0 Register).
7 6 5 4 3 2 1 0
WT7 WT6 WT5 WT4 WT3 WT2 WT1 WT0
Bit
Number
Bit
Mnemonic Description
7-0 WT[7:0]
Wait Time Byte 0
WT[23:0] is the reload value of the Wait Time counter WTC.
The WTC is a general-purpose Timer 0. It is using the ETU clock and is
controlled by the WTEN bit (see Section “Waiting Time Counter (WT)”).
When UART bit of SCICR Register is set, the WTC is automatically reloaded at
each start bit of the UART. It is used to check the maximum time between to
consecutive start bits.