Warning – BabyTrend HYBRID 3-IN-1 User Manual

Page 22

Advertising
background image

The “REAR ENTRY” belt routing must

be used when a Top Tether is NOT used

to secure this Car Seat.

Note: Installation with Top Tether is

recommended whenever possible.

Baby Trend requires using the Top Tether

provided with this Car Seat whenever possible.

However when a tether anchor is not available

in the vehicle, the Car Seat can be secured

without the Top Tether. Always store the Top

Tether when not in use by securing the tether

hook to the Tether Storage on the lower

back of the Back Support as shown.
Based on the seating location selected, identify

if LATCH or a vehicle lalp/shoulder or lap belt

only will be used to secure the car seat. Use

the LATCH system when available. Follow the

steps in the following sections for the type of

belt that will be used to secure the car seat.
Note: Store tether on back of seat when

not in use.

41

7.0

Toddler Car Seat (

With

Built-in

Harness) Installation and Use

7.4 Installation -

WITHOUT

Top Tether

REAR

ENTRY

Belt

Routing

7.0

Toddler Car Seat (

With

Built-in

Harness) Installation and Use

42

7.4.1 Installation - LATCH

WITHOUT

Top Tether

WARNING!

• Only use the car seat LATCH System in vehicle seating

positions designated by the vehicle manufacturer for use

with LATCH and have anchor spacing of 11 inches (280 mm).

• The car seat must be held tightly by the LATCH System.

• Never attach more than one lower anchor connector or top

tether hook to a vehicle anchorage unless recommended in

the vehicle owner’s manual.
The LATCH attachment system should be used

WITH

the Top Tether

up to 50 lbs. (23 kg) whenever a secure installation can be achieved.

When used

WITHOUT

the Top Tether the LATCH attachment system

may be used to 50 lbs. (23 kg) or maximum

weight for LATCH use specified by the

vehicle’s owner’s manual.

To secure car seat in vehicle:

1. Assemble the Back Support (see “Assembly

and Removal of Back Support” section).
2. Store Top Tether by securing Tether

Hook on Tether Storage at bottom

of Back Support as shown.

LATCH Connectors

Top Tether

Tether/LATCH

Storage

LATCH Connectors

Top Tether

Tether/LATCH

Storage

Advertising