BabyTrend HYBRID 3-IN-1 - Manual (Page 33)

63
8.0
Booster Car Seat
( Without Built-in Harness)
Installation and Use
11. Check fit of the vehicle seat belts on child:
- Vehicle lap belt must be low on hips contacting the thighs.
- Vehicle shoulder belt must contact the chest and be centered
on the shoulder. Adjust Head Support to position the vehicle
shoulder belt.
- DO NOT place vehicle shoulder belt
under child’s arm or behind child.
- Use Back Support as long as possible.
- Discontinue use of High-back and
change to Backless Booster use mode
when child’s shoulders DO NOT fit
comfortably under side wings of the
Head Support.
WARNING!
• Securely belt this Car Seat in vehicle, even when not
occupied. An unsecured Car Seat can injure other occupants
in a crash.
To remove your child:
1. Unbuckle vehicle seat belt and remove your child.
DEATH or SERIOUS INJURY can occur:
• Child must be at least 4 years old and
weigh at least 40 lbs. (18 kg) to use the
Backless Booster Car Seat.
• Use High-back Booster mode as long as
possible. The Back Support and Head
Support provide incremental crash
protection in frontal and side impact
crashes. Removing the Back Support and
Head Support earlier than necessary also
removes the incremental crash protection.
• Vehicle lap/shoulder belt must be properly
positioned on child. Use vehicle shoulder belt
positioner to center vehicle shoulder belt on
child’s shoulders.
• Discontinue use of the Backless Booster Car
Seat when the top of the child’s ears are above
top of the vehicle seat back or vehicle headrest.
WARNING!
64
8.0
Booster Car Seat
( Without Built-in Harness)
Installation and Use
8.2 Backless Booster Car Seat ( WITHOUT Built-in
Harness) Installation and Use
To secure car seat and your child:
1. Remove harness system and seat back support (see “Harness
Removal and Assembly” section and “Assembly and Removal for Back
Support” section.