BabyTrend HYBRID 3-IN-1 - Manual (Page 28)

To secure your child:
1. Check that harness straps are through
harness slots at or just above child’s
shoulders.
2. Place child in Car Seat with child’s back
contacting Back Support and rump
contacting seating surface.
3. Buckle harness.
- Place harness straps over child’s
shoulders and thighs.
- Insert buckle tongues into buckle.
You should hear a click.
- Pull up on buckle tongues to be
sure they are locked.
- DO NOT use the Car Seat if the
harness buckle does not lock
securely. Contact Baby Trend at
1-800-328-7363 for assistance.
Check that harness straps
are not twisted.
53
7.0
Toddler Car Seat ( With Built-in
Harness) Installation and Use
WARNING!
DEATH or SERIOUS INJURY can occur:
• Failure to properly adjust the harness on your child
increases the risk of death or serious injury in the event of
a sudden stop or crash. Follow the instructions very closely
to ensure that the harness is properly adjusted to fit your
child at all times. Your child will grow very rapidly! Please
check the fit of the harness every time you use the Car Seat.
• Harness straps must be through harness
strap slots located at or above child’s
shoulders.
• Snugly adjust harness provided with the
Car Seat around child.
• For snug harness fit, use Body Insert for
small child.
• Discontinue use of Body Insert when child’s shoulders
are at or above top harness strap slots.
• Discontinue use of harness when child’s weight exceeds
50 lbs (23 kg) or shoulders are above top harness strap slots.
• Do not use accessories such as strap covers, blankets,
cushions, or padding under harness straps or child unless
provided by Baby Trend.
• Do not use Car Seat with harness straps loose or unbuckled.
Harness straps MUST be snug and positioned over shoulders
and thighs of child.
7.0
Toddler Car Seat ( With Built-in
Harness) Installation and Use
54
Buckle
Tongue
Buckle