BabyTrend HYBRID 3-IN-1 - Manual (Page 27)

51
7.0
Toddler Car Seat ( With Built-in
Harness) Installation and Use
9. Check for a secure installation by grasping
the car seat armrest and pushing side-to-side
and front-to-back. The car seat should not
move more than 1 inch in either direction.
• If the car seat moves more than
1 inch, retighten the LATCH belt
and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
“Vehicle Seat Belts” section and check
your vehicle owner’s manual for
information on securing car seats.
To remove car seat:
1. Unbuckle vehicle seat belt and remove
seat belt from belt path.
7.0
Toddler Car Seat ( With Built-in
Harness) Installation and Use
52
7.5 Securing your Child
Minimum Use Recommendations
Child must be at least 1 year old, able to
sit upright unassisted and weigh at least
22 lbs. (10 kg) to use this Car Seat.