BabyTrend HYBRID 3-IN-1 - Manual (Page 45)

To attach vehicle Shoulder Belt Positioner:
• Attaching the Shoulder Belt
Positioning Clip to backless booster:
- Lay Shoulder Positioning Belt Clip
out on flat surface with free end
on top.
- Slide loop end down through one of the
slots at the back edge of the seat base.
- Thread the Shoulder Belt Guide and
free end of the Shoulder Belt Positioner
through the loop on the loop end and
pull to elimiate any slack.
Note: The Shoulder Belt Guide
should be positioned so that the
free end of the Shoulder Belt
Positioner faces the front seat.
10.0
Operation and Adjustments
87
Use and Adjustment of Shoulder Belt Positioner
- Insert the vehicle shoulder belt into both
sides of the clip.
- Pull the free end of the strap down to
tighten the clip against the child’s shoulder
and bring the shoulder belt into the proper
position.
To remove vehicle Shoulder Belt Positioner:
- From back of car seat, unthread the
Shoulder Belt Positioner from the loop end.
- Store the Shoulder Belt Positioner in pouch
located on side of seat base.
88
10.0
Operation and Adjustments
Free end
Loop end
Owner’s Manual/
Shoulder Belt
Positioner Storage
Pocket (under pad)