Preparing car seat for use – BabyTrend HYBRID 3-IN-1 User Manual

Page 8

Advertising
background image

4.0

Preparing Car Seat for Use

13

The steps to prepare the Car Seat for use with your child are

outlined below and described in detail in this owner’s manual.

4.1

Assemble the Back Support (see “Assembly and

Removal of Back Support” section)

Before using your Car Seat in your vehicle, you must assemble

the Back Support to the Seat Base (see “Assembly and Removal

of Back Support” section).

4.2

Determine the Use Mode and Prepare the Car Seat

for your Child

Toddler Car Seat

WITH

Built-in Harness System “22 - 50 lbs.”

(10 to 23 kg) (see Weight and Height Recommendations”

section).

- Use Body Insert with smaller child.

- Harness strap height must be at or

above child’s shoulder.

- Adjust the harness strap height to fit

your child (see “Changing Harness Strap

Height” section).

- Discontinue use of Body Insert when child’s

shoulders are at or above top harness strap slots.

High-back Booster Car Seat

WITHOUT

Harness System

“30 - 100 lbs.” (13.6 to 45 kg) (see Weight and Height

Recommendations” section).

- Remove the harness system for Booster Car Seat Use

(see “Harness Removal and Assembly” section).

- Remove Body Insert.

- Adjust head support for your child (see”Adjusting the Head

Support” section).

4.0

Preparing Car Seat for Use

14

Backless Booster Car Seat

WITHOUT

Harness System

“40 - 100 lbs.” (18 to 45 kg) (see Weight and Height

Recommendations” section).

- Remove Back Support (see “Assembly and Removal of

Back Support” section).

4.3

Select a Vehicle Seating Location to Install the

Car Seat

Toddler Car Seat

WITH

Built-in Harness System

• Select a vehicle seating location with a tether anchor, if

available. Baby Trend requires using the tether for

installation whenever possible.

Note: The belt routing for installation is dependent on

Tether use. Use “Front Entry” belt routing when

using

WITH

a Tether. Use “Rear Entry” belt

routing when using

WITHOUT

a Tether.

Booster Car Seat

WITHOUT

Harness System

• Select a vehicle seating location with a lap/shoulder belt.

• Never use a vehicle seating location with only a lap belt.

Advertising