BabyTrend HYBRID 3-IN-1 - Manual (Page 42)

10.0
Operation and Adjustments
81
10.4 Harness Removal and Assembly
Harness Removal:
a. Buckle harness and chest clip to
hold harness system together.
b. Loosen harness straps by depressing the
Harness Adjuster and pull out on the
harness straps .
c. From the back of the car seat, locate the
Harness Connector Plate and remove both
Harness Straps from the Harness Connector
Plate. Be sure to note how the Harness Straps
are attached to assist in reattaching.
d. From front of car seat, pull Harness Straps out
of Harness Strap Slots and out through front of
car seat.
10.0
Operation and Adjustments
82
e. Remove lower end of harness strap
and Crotch Belt.
- From bottom of Seat Base, pull the
metal harness retainer away from the
bottom of the Seat Base.
- Rotate the metal harness retainer and
harness strap to position the narrow
side of the metal harness retainer
into the harness slot.
- Slide the metal plate through the
harness slot opening in the Seat
Base and seat pad.
- Pull the harness strap and metal
harness retainer out through the
top of the seat pad.
- Repeat for other harness strap and
Crotch Belt.
f. Store harness in cool dry location for
future use.
1
1
2
2