BabyTrend HYBRID 3-IN-1 - Manual (Page 35)

67
8.0
Booster Car Seat
( Without Built-in Harness)
Installation and Use
9 . Check fit of the vehicle seat belts
on child:
- Vehicle lap belt must be low on hips
contacting the thighs.
- Vehicle shoulder belt must contact the
chest and be centered on the shoulder.
Use the shoulder belt positioner to adjust
the position of the vehicle shoulder belt.
- DO NOT place vehicle shoulder belt
under child’s arm or behind child.
WARNING!
• Discontinue use of Backless Booster when top of child’s ears
are above top edge of vehicle head rest and vehicle seat back.
To remove your child:
1. Unbuckle vehicle seat belt and remove your child.
68
9.0
Vehicle Seat Belts
9.1
Check that the Vehicle Seat Belt is Safe to Use
Toddler Car Seat use ( WITH Build-in Harness)
The Car Seat must be tightly secured at all times. The vehicle seat
belt must be capable of maintaining tight installation at all times.
A variety of vehicles have been equipped with vehicle seat belt sys-
tems that are not safe for use with the Car Seat. These systems may
look safe but their method of operation precludes their use with the
Car Seat. If you are unsure if the vehicle seat belt is safe for use with
the Car Seat, please contact the vehicle manufacturer for additional
information.
Toddler Car Seat use ( WITHOUT Build-in Harness)
The vehicle seat belt must be able to be properly positioned on child
and snugly adjusted around child’s hips and onto shoulder.
WARNING!
Carefully analyze the operation of the vehicle seat belts
before using the Car Seat. Being able to thread the vehicle
seat belt through the Car Seat is not an indication that the
vehicle seat belt is safe to use. Carefully read this section on
vehicle seat belt systems, review your vehicle owner’s
manual in detail, and heed any and all warning labels on your
vehicle’s seat belt. Your vehicle may require a modification or
special seat belt in order to be safely used with this Car Seat.
Please see your vehicle dealer for this service.