SENA SS800 - Manual (Page 105)

105
Appendix 1. Connections
A 1.1. Ethernet Pinouts
The Super Series uses the standard Ethernet connector that is shielded connector compliant with
AT&T258 specifications. Table A-1 shows the pin assignment and wire color.
Figure A-1 Pin layout of the RJ45 connector
Table A-1 Pin assignment of the RJ45 connector for Ethernet
Pin Description Color
1 Tx+ White with orange
2 Tx- Orange
3 Rx+ White with green
4 NC Blue
5 NC White with blue
6 Rx- Green
7 NC White with brown
8 NC Brown
A 1.2. Console And Serial Port Pinouts For SS100
The pin assignment of the SS100 DB9 connector is summarized in Table A-2. Each pin has a function
according to the serial communication type configuration.
6 7 8 9
1 2 3 4 5
Figure A-2 Pin layout of the DB-9 connector of SS100
Table A-2 Pin assignment of DB-9 connector for console and serial port of SS100
Pin RS232 RS422 RS485
1 - Tx- Data-
2 Rx - -
3 Tx Rx- -
4 DTR Rx+ -
5 GND - -
6 DSR - -
7 RTS - -
8 CTS - -
9 - Tx+ Data+