SENA SS800 - Manual (Page 125)

125
serial InUse LEDs blink to indicate the hardware test has failed. In this case, the user must press the
<ctrl-c> keys to return to the menu page.
A 5.5. Firmware Upgrade Menu
By using the ‘Firmware upgrade’ menu, the user can upgrade the firmware of the unit. Before
firmware upgrade, the user can check the current firmware version by selecting menu item 3 from the
Main menu page . The firmware upgrade menu program supports two protocols for remote firmware
download: BOOTP and TFTP. The default protocol is BOOTP for DHCP environments. If the user
selects TFTP, he must also set the IP address for the unit properly. The default IP address for the unit
is 192.168.161.5.
For firmware upgrade, a firmware file configured as [Firmware File Name] on the server configured
as [Server’s IP address] must exist.
-----------------------------------------------------------------------------
Firmware upgrade
-----------------------------------------------------------------------------
Select menu
1. Protocol [BOOTP]
2. IP address assigned to Ethernet interface [192.168.161.5]
3. Server's IP address [192.168.0.128]
4. Firmware File Name [ss800.bin]
5. Start firmware upgrade
<ESC> Back, <ENTER> Refresh
-----> 1
Select protocol ( 1 = BOOTP, 2 = TFTP) : 2
-----------------------------------------------------------------------------
Firmware upgrade
-----------------------------------------------------------------------------
Select menu
1. Protocol [TFTP]
2. IP address assigned to Ethernet interface [192.168.161.5]
3. Server's IP address [192.168.0.128]
4. Firmware File Name [s800.bin]
5. Start firmware upgrade
<ESC> Back, <ENTER> Refresh
----->
Figure A-15 Firmware upgrade menu within Bootloader Menu Program
If the user selects [Start firmware upgrade], a confirm message will be displayed on the screen.
If the user enters ‘y’, the firmware upgrade process will start. This process cannot be stopped until it is
finished.
-----------------------------------------------------------------------------
Firmware upgrade
-----------------------------------------------------------------------------
Select menu