Ip filtering – SENA SS800 User Manual
Page 33
33
The SMTP user name and SMTP user password are required when either SMTP with authentication
or POP-before-SMTP mode is selected.
Figure 3-5 SMTP Configurations
Figure 3-6 SMTP mode selection in SMTP configuration
3.5. IP Filtering
The Super Series prevents unauthorized access using either an IP address based filtering method or
through the management web page of the Super Series. The users can allow one of the following
scenarios by changing the parameter settings:
- Only one host of a specific IP address can access the Super Series
- Hosts on a specific subnet can access the Super Series
- Any host can access the Super Series
The IP filtering feature for access to Telnet console, SSH console or Web server may be enabled or
disabled. The factory default of the filtering feature is “Enabled”.
The user may allow a host or a group of hosts to access the Super Series for configuration. The user