GE Industrial Solutions Entellisys 5.0 Administrator Manual User Manual
GE Industrial Solutions Equipment
Advertising
Table of contents
Document Outline
- 1.1 Security Champion 7
- 4.1 HMI User configuration 13
- 4.2 Modbus® security 18
- 5.1 Operation 24
- 5.2 RELT Groups 27
- 5.3 Administration 29
- 6.1 Time synchronization configuration screen 34
- 6.2 Basic time sync configuration for stand-alone systems 35
- 6.3 Time Sync configuration for multiple lineups 36
- 6.4 Using an external time server 37
- 6.5 Troubleshooting 38
- 7.1 Network re-configuration procedure 41
- 7.2 Changing the CPU IP address 42
- 7.3 Changing the local HMI IP address 43
- 7.4 Verify local communication to CPU 44
- 7.5 Network security/VPN device 45
- 8.1 Installing and configuring remote HMI 47
- 8.2 Multiple lineups 50
- 8.3 Configuring Lineups 50
- 9.1 Offline mode 55
- 9.2 Viewing and comparing settings files 57
- 9.3 Writing settings to a live system 57
- 9.4 Resetting the offline settings files to the current settings 58
- 10.1 Publishing shared files 59
- 10.2 Updating an HMI with shared files 60
- 11.1 Restoring an archive 62
- 11.2 Creating an archive 62
- 12.1 Viewing installed options 65
- 12.2 Upgrading options 66
- 13.1 Part II - Replacing the CPU 70
- 14.1 Viewing and updating circuit breaker names 79
- 14.2 Viewing and updating circuit breaker accessories 80
- 14.3 Installing CPU firmware 82
- 14.4 Viewing zone configuration 83
- System administrator roles and responsibilities
- Pre-programming settings prior to switchgear arrival
- Commissioning the switchgear
- User administration
- Reduced Energy Let-Thru Mode
- Time synchronization
- Establishing communication to Remote HMIs
- Remote HMI Software
- Settings files and offline system configuration
- Sharing files across HMIs
- System archives
- Feature options
- Preparing and configuring a replacement CPU
- Other maintenance functions
- Administrator access to the operating system