GE Industrial Solutions Entellisys 5.0 Administrator Manual User Manual
Page 16
Advertising
User administration
16
4
To change a password
1. On the Main Menu, click the User Administration button (Visible only by an Entellisys
Administrator)
2. Select the desired user group on the left-side pane. Expand the group by clicking the +
symbol and click a user name
3. Enter the new password in the New Password field
4. Confirm your password by re-entering the new password in the Confirm Password field.
Click OK to save your new password (or click Cancel to exit)
To verify the password change:
1. Log out of the HMI by clicking the Login/Logout icon in upper right-hand corner
Figure 4-4 Login/Logout icon
2. Click once more to log back in and enter the new user name and password
Advertising