GE Industrial Solutions Entellisys 5.0 Administrator Manual - Manual (Page 71)

Replacing the CPU 71
13
Running the Replacement Wizard
The replacement wizard is only available on the Local HMI.
Navigate to the Replace CPU tab from the Main Menu/Maintenance. Click on “Perform
Replacement”
Figure 13-2 Running the replacement Wizard
Step 1 – Select CPU dialog box will be displayed to confirm the replacement CPU.
The wizard will attempt communication to all known Entellisys devices and will automatically
select the missing CPU. Click next to continue.
Figure 13-3 Step 1 – Select CPU