Preparing and configuring a replacement cpu, 13 preparing and configuring a replacement cpu – GE Industrial Solutions Entellisys 5.0 Administrator Manual User Manual
Page 69
69
13
13
Preparing and configuring a replacement
CPU
This procedure discusses the steps to be performed within the HMI when replacing a CPU. The
actual mechanical replacement procedure is located in the DEH-234 Entellisys Low Voltage
Switchgear Device Replacement Guide, Chapter 1, “Replacing a CPU chassis”. Please read these
instructions thoroughly prior to beginning the replacement.
NOTE: At least one CPU must be working. Factory must generate a new option string with the
serial number of the new CPU. The new option string must be present before starting this wizard
- which can either emailed or a USB must be shipped from the factory.
If both CPUs are down, GE Factory services must be called to restore CPUs
Contact GE Post Sales Service (1-888-437-3765) at
.