GE Industrial Solutions Entellisys 5.0 Administrator Manual - Manual (Page 79)

Viewing and updating circuit breaker accessories 81
14
To view or change the circuit breaker accessories
1. On the Main Menu, click the Maintenance button. The button will only be displayed if access
is allowed with the current login permissions.
2. Click the Accessories tab. A table will display as shown as in Figure 14-2.
Figure 14-2 Breaker Accessories screen
•
Breaker Name: Unique name given to a circuit breaker.
•
Electric Operated: Accessory allows the circuit breaker to be opened, closed, and charged
remotely. The check box should be selected if this accessory is present.
•
LockOut: Circuit breaker contains either a bell alarm lockout accessory to prevent reclosing
after tripping, or a network interlock accessory to prevent closing during automatic throw
over. The check box should be selected if this accessory is present.
•
Position Switch: Circuit breaker contains an accessory that provides remote monitoring of
the position of the circuit breaker during rack-in and rack-out. The check box should be
selected if this accessory is present.
3. Click the OK button to keep changes (or click Cancel to exit the screen without saving).