GE Industrial Solutions Entellisys 5.0 Administrator Manual - Manual (Page 49)

Installing and configuring remote HMI 49
8
Figure 8-1 Remote HMI License Activation window
To obtain an Activation code, call GE at:
GE Switchgear – Post Sales Service
510 Agency Road, West Burlington, IA 52655
Phone (toll free): 1-888-437-3765
Please have the following information ready:
Entellisys System Identifier: Summary#, Sub#
• HMI Type: User Interactive or Viewer, on the blue title bar in Figure 8-1
• SITE CODE: from the activation window in Figure 8-1
• MID CODE: from the activation window in Figure 8-1
GE will verify that unused licenses of the desired version are available and will provide an
Activation code for the software. Type in the Activation code and click Continue.
An example Activation code follows:
D11C8284-F54A0910-03D20031-B1ACADFA
Step 4: Configure Remote HMI to communicate to CPUs
After the software is licensed, the HMI will immediately open the HMI Preferences Screen.
Click on Config Lineup and modify the “Default Lineup” with the IP addresses of the CPUs.
(See
Configuring Lineups on page 50 for details)