GE Industrial Solutions Entellisys 5.0 Administrator Manual - Manual (Page 52)

Remote HMI Software 52
8
again when the user selects the HMI from the “Select Lineup” screen. If there is a mismatch, the
user will be prompted to either update the HMI or do nothing.
Figure 8-3 HMI file mismatch dialog
If the Entellisys system was configured in offline mode, do not select “Update HMI.” See section
Writing settings to a live system on page 57 for details on uploading settings to the CPU.
NOTE: The order in which lineups appear in the “Select Lineup” screen is fixed to the order in
which they were added into the HMI.