GE Industrial Solutions SG Series 10 – 20 – 30 – 40 kVA Installation Guide - Manual (Page 11)

3 INSTALLATION
3.1 TRANSPORT
Transport UPS only in upright position!
The UPS is packaged on a pallet suitable for handling with
a forklift.
Pay attention to the center of gravity.
The UPS must be moved in upright position.
Do not tilt cabinets more than +/- 10° during handling.
Move the UPS in it’s original package to the final
destination site.
Do not stack other packages on top: This could damage
the UPS.
If the UPS must be lifted by crane, use suitable lifting straps
and spreader bars.
Modifications reserved Page 11/45
OPM_SGS_ISG_10K_40K_0US_V040.doc Installation Guide SG Series 10 –20 – 30 - 40 kVA
Note of the center of gravity marked on the package.
Take all necessary precautions to avoid damage to the
cabinet while hoisting the UPS.
Forklift
Crane
NOTE !
Fig. 3.1-1 UPS cabinets moving
Check for sufficient floor and elevator
loading capacity.
3.1.1 Dimensions and weight
Dimensions SG Series 10 - 20 - 30 - 40 kVA
(W x D x H)
26.78 x 31.50 x 70.90 inches
680 x 800 x 1,800 mm
S G T5
00
0_
03
0- 04
0_
U P S dim
e n s io ns
_ G E _0
1 U S
H
W
D
Fig. 3.1.1-1 UPS cabinet dimensions
Weight SG Series 10 - 20 - 30 - 40 kVA
UPS without battery UPS with battery
Weight
lbs / kg
Floor loading
lbs/sq.ft - kg/m 2
Weight UPS rating
lbs / kg
Floor loading
lbs/sq.ft - kg/m 2
SG Series 10 kVA 735 / 333 126 / 613 1,121 / 508 192 / 934
SG Series 20 kVA 763 / 346 131 / 637 1,169 / 530 200 / 975
SG Series 30 kVA 970 / 440 166 / 809 – –
SG Series 40 kVA 1,147 / 520 – – 196 / 956
P.S.: Weights including the 5th harmonic filter.