MJK Automation Shuttle Ultrasonic Level Transmitter and Sensor - Manual (Page 17)

17 SW 838023 GB Shuttle Manual 100316
Display and keyboard
Units of measurement
If the measuring unit is changed, all other values in menus
and settings will automatically be converted to the new
measuring unit.
In this example the measuring unit is changed from metres
to feet.
The settings will be rounded off automatically.
Shuttle ® reverts to normal read-out with the new measuring
unit.
Select unit with the arrow keys.
The dot indicates the position of the decimal separator.
Note: 'mm' or 'in' cannot be selected if it could cause
overrun in the display read-out.
6,59 ft
0,0 ft
2,00 m
0,00 m