MJK Automation Shuttle Ultrasonic Level Transmitter and Sensor - Manual (Page 5)

5 SW 838023 GB Shuttle Manual 100316
Introduction
Introduction
Thank you for choosing a Shuttle ® Ultra-
sonic Level Transmitter.
We have done everything possible to make
a level transmitter that can fulfill all your
demands.
Shuttle
® is suitable for all kinds of level
measurements with ultrasound and can
control and supervise levels in wells and
tanks - including aggressive and polluted
media.
The level meter is both easy to install and
put into service, but read this manual first -
then you will get the most benefits from the
Shuttle
® Ultrasonic Level Transmitter right
from the beginning.
You can always contact your representative
or the MJK Service Hotline for advice and
guidance.
Also, take a look at http\\:www.mjk.com.
Shuttle
® is registered trademark of MJK.
About this manual
Main sections
This manual is divided into the following
three main sections:
1: Introduction
presentation of the Shuttle ® and this
manual
2: Mounting
information for performing mechanical
and electrical mounting.
3: Basic settings
a look through the most common set-
tings
Illustrations
All the Shuttle
® display read-outs are il-
lustrated in this manual. Some of the display
segments will flash, and in this manual the
display read-outs with flashing segments are
coloured white and the fixed segments are
coloured black.
Example: Normal display read-out -
none of the segments are flashing.
Example: Missing echo -
the bar on the right hand side is flashing.
Section "Display" gives a more detailed
description of the display symbols shown
during programming and during normal
service. Furthermore, the menu explanations
show all the display indications belonging
to the specific menu during programming of
the Shuttle
® Ultrasonic Level Transmitter.