Physio-Control LIFEPAK 1000 - Manual (Page 13)

Safety
LIFEPAK 1000 Defibrillator Operating Instructions 1-3
©2006-2012 Physio-Control, Inc.
SYMBOLS
The following symbols may be found in this manual or on various configurations of the LIFEPAK
1000 defibrillator and its accessories.
Possible device shutdown.
Always have access to a spare, fully-charged, properly maintained battery. Replace the battery
when the device displays a low battery warning.
Possible improper device performance.
Using other manufacturers’ cables, electrodes, or batteries may cause the device to perform
improperly and invalidates the safety agency certification and may invalidate the warranty. Use
only the accessories specified in these operating instructions.
Safety risk and possible equipment damage.
Monitors, defibrillators, and their accessories (including electrodes and cables) contain
ferromagnetic materials. As with all ferromagnetic equipment, these products must not be used
in the presence of the high magnetic field created by a Magnetic Resonance Imaging (MRI)
device. The high magnetic field created by an MRI device will attract the equipment with a force
sufficient to cause death or serious personal injury to persons between the equipment and the
MRI device. This magnetic attraction may also damage the equipment. Skin burns will also
occur due to heating of electrically conductive materials, such as patient leads and pulse
oximeter sensors. Consult the MRI manufacturer for more information.
CAUTION!
Possible equipment damage.
This device may be damaged by mechanical or physical abuse such as immersion in water or
dropping the device. If the device has been abused, remove it from use and contact authorized
service personnel.
Defibrillation-protected. Type BF patient connection
Attention. Consult accompanying documents
Warning. High voltage
Type BF patient connection
Menu button
Battery status symbol
WARNINGS! (CONTINUED)