Physio-Control LIFEPAK 1000 - Manual (Page 75)

Changing Setup Options
LIFEPAK 1000 Defibrillator Operating Instructions D-5
©2006-2012 Physio-Control, Inc.
Access Pulse Setup from the AED menu. The underlined bold options in Table D-7 are the
factory default settings.
Access the Manual menu from the Manual Mode option in Setup. The underlined bold options in
Table D-8 are the factory default settings.
Table D-7 AED Setup Menu—Pulse Setup Submenu
Menu Item Help Message Options
PULSE CHECK Enable pulse check prompt. NEVER : Never prompt for PULSE CHECK .
AFTER SECOND NSA : After every NSA
except for first analysis NSA result.
AFTER EVERY NSA : Only after NO SHOCK
ADVISED .
ALWAYS : After every stack of shocks and
every NSA finding .
PULSE PROMPT Select prompt for patient vital
signs. CHECK PULSE , CHECK BREATHING,
CHECK CIRCULATION, OPEN AIRWAY .
AED
MONITORING Enable monitoring while in
AED mode. ON , OFF .
MONITORING
REPEAT Select AED monitoring prompt
repeat time. OFF , 1 , 2, 3, or 5 minutes .
PREVIOUS PAGE Go back to previous page.
Table D-8 Manual Setup Menu
Menu Item Help Message Options
MANUAL
ACCESS Enable Manual mode access. ON , OFF .
ANALYZE Enable SAS analysis in Manual
mode. (An
ANALYZE softkey is
provided in Manual mode.)
ON , OFF .
PREVIOUS PAGE Go back to previous page.