Physio-Control LIFEPAK 1000 - Manual (Page 72)

Changing Setup Options
D-2 LIFEPAK 1000 Defibrillator Operating Instructions
Figure D-2 Setup Mode Screen
Setup Menu Options
All setup options for your defibrillator are grouped under these top-level headings.
• General
• AED Mode
• Manual Mode
• Set Passcode
• Service Mode
Use the softkeys to navigate and make selections on the Setup screen. The label on the screen
and above each softkey identifies the current softkey function.
Press NEXT to advance through the menu options.
When an option is highlighted, a Help message about the option appears at the top of the
screen, as shown in
Table D-1 .
To choose an option, highlight your choice on the screen and press SELECT .
Table D-1 Top-Level Setup Menu
Menu Item Help Message Options
GENERAL Set up general device options. See How to Enter and Delete Device
Information, page D-7 .
AED MODE Set up AED mode defaults.
MANUAL MODE Set up Manual mode defaults.
SET PASSCODE Set passcode to enter Setup
mode.
SERVICE MODE View service options.
Labels
Softkeys
Menu button
General...
AED Mode...
Manual Mode...
Set Passcode...
Service Mode...
Setup
Set up general device options
Next Select