Elmo Rietschle G-BH1e - Manual (Page 25)

© Gardner Denver Deutschland GmbH 25 / 52 610.44521.40.000
Installation
4.4.4 Connecting frequency inverters
2FC4302-1NE00 ... 2FC4752-1NE00
 DANGER!
Electrical danger!
Improper connection of the pump−motor unit
can result in an electric shock.
Observe the following basic rules:
 The leakage current to earth (PE) is > 3.5
mA. The PE connection must meet EN
50178.
 Observe national and regional regulations.
CAUTION
Danger of pump−motor unit damage caused
by improper connection!
Observe the permissible mains voltage. Any
higher mains voltage will destroy the frequency
inverter.
Wiring according to EMC requirements
(installation of a CE-typical drive system)
The pump−motor units meet the EU Directive on
"Electromagnetic Compatibility" if they are
installed in accordance with the specifications of
the CE−typical drive system. The end−user is
responsible for maintaining the EU Directive in
the overall system.
NOTE
Requirements for trouble−free operation:
 Always shield control cables.
 Provide large−surface contact between
shielding and shield sheet. Ensure good
electrical contact.