Elmo Rietschle G-BH1e - Manual (Page 26)

610.44521.40.000 26 / 52 © Gardner Denver Deutschland GmbH
Installation
Realisation
G
H
B A
C D
X1
X2
E
F
2ne2bhxn398
Fig. 13: Electrical connections 2FC4302-1NE00 … 2FC4752-1NE00
 Mains cable L1, L2, L3, PE
 PE connection mains cable
 Shielded control cable
Shield connection for the control cable: g:
1 Prepare cable..
ne2bhxn045
2 Insert cable tie..

ne2bhxn046
3 Insert cable and tighten cable tie:
– The shielding must have large−surface
contact to the shield sheet.
– The shielding must be connected
tightly to the shield sheet.
ne2bhxn047
 Potential−free terminals
 PE connection motor
 Support for control terminal module
 Control terminal module
X1 Terminal strip for mains connection and relay
output connection
X2 Terminal strip for motor connection
PES HF shield termination by large−surface
connection to PE